Artec MULTIEYE, Руководство пользователя

Страница: 36 / 204

MULTIEYE Usermanual 36
© 2008 artec technologies AG
4.7 Recorder chassis
Normally the standard PC-chassis offers 6 free usable slots and so it's possible to use up to 24 analog video
channels. In addition you can realize a recorder up to 32 channels in s smaller chassis, when you use an EX-24
extension board.
Optimal are 19" server chassis with server boards. Hereby you can use up to 14 free slots for video and extension
boards.
This example shows the back of a 16 channel recorder.
4.8 Hints for preparing the system
4.8.1 BIOS
Before installing video boards, you should make sure that the most up-to-date BIOS version is installed. For that,
contact either your computer dealer or the producer of the mainboards directly.
For the secure operation of MULTIEYE-HYBRID, it is recommended that the computer automatically re-boots after
a power outage. This option must be activated in your computer’s BIOS. To do this, press the “DEL" or “F2" key
(see your mainboard‘s manual to find out which) when the computer is booting.
The designation for this function can vary greatly, and depends on the used BIOS version. (It is usually “Power up
Control" or “PWROn after PWR fail".) Please check your computer’s user’s manual to see if this function is
supported.
In case the MULTIEYE-HYBRID system is to be operated without a keyboard, then the option “Halt on Errors"
should be set to “All but Keyboard".
In most cases, it is recommended to set the option “PNP OS" to “NO", since the BIOS will then distribute the
available interrupts prior to activation of the operating system.
Changes in the BIOS have to be saved and the computer has to be restarted.