Artec MULTIEYE Скачать руководство пользователя страница 35

Страница: 35 / 204

Hardware

4.4

Additional extension boards

4.4.1

Audio extension EX-Audio 16

With the EX-AUDIO16 board, 16 audio sources can be recorded. If the EX-AUDIO16 is operated together with

video boards in one system, then the video board’s audio input(s) will be automatically de-activated.

MULTIEYE-HYBRID software supports operation with up to 32 audio channels. This corresponds to two

EX-AUDIO16 boards.

4.5

USB Dongle for MULTIEYE-NET (WIBU-Key Dongle)

The Software MULTIEYE-NET will be delivered with an USB dongle.

This dongle protects the MULTIEYE software and is similar the license-key for additional extensions, online

updates, etc.

Important:

At the installation of the MULTIEYE-NET software the dongle-driver has to be installed separately!

Informations and hints are found in the Windows systemcontrol under "WIBU Key".

4.6

Connecting PTZ cameras

Analog PTZ cameras are normally connected to a RS 485 interface. At the PC an external converter from

RS-232

to RS-485 is required.

Содержание MULTIEYE













































































































































































































Результаты поиска

Содержание MULTIEYE

Отзывы:

Бренды по названию

Популярные бренды

Artec MULTIEYE, Руководство пользователя

Результаты поиска

Содержание MULTIEYE

Отзывы:

Бренды по названию

Популярные бренды