background image

The Pro Channel was designed and manufactured in the United States of America. 
 

Applied Research and Technology, Inc. 

 

(716) 436-2720 (Phone) 

 215 

Tremont 

Street     (716) 

436-3942 

(FAX) 

 

Rochester, NY 14608 USA 

We’re on-line! 

For Product information, questions, applications, tips, answers and general discussion 
with A R T employees look for A R T on the Internet.  Email us at [email protected]   
Check out our Web Site at: http://www.artroch.com  

Warranty and Service Information 

Limited Warranty 

Applied Research and Technology, Inc.  (A R T) will provide warranty service for this 
unit in accordance with the following warranty statement.  A R T warrants to the 
original purchaser that this product is free from defects in workmanship and materials 
for a period of three years from the date of purchase.  A R T will, without charge, repair 
or replace, at its option, defective product or component parts upon prepaid delivery to 
the factory service department or an authorized service center, accompanied by proof of 
purchase date in the form of a valid sales receipt.   

EXCLUSIONS:

 This warranty does not apply in the event of misuse or abuse of the 

product or as a result of unauthorized alterations or repairs.  This warranty is void if the 
serial number is altered, defaced or removed. 
A R T reserves the right to make changes in design and make additions or 
improvements upon this product without any obligation to install the same on products 
previously manufactured.  A R T should not be liable for any consequential damages, 
including without limitation damages resulting from the loss of use.  Some states do not 
allow limitation of incidental or consequential damages, so the above limitation or 
exclusion may not apply to you.  This warranty gives you specific rights and you may 
also have other rights, which vary, from state to state.  For products purchased outside 
the United States, service will be provided by an authorized distributor of Applied 
Research and Technology, Inc.  products. 

- 22 - 

Содержание Pro Channel

























Отзывы: