Cable Modem Start Up Sequence
The following table shows the start-up sequence for the cable modem portion of the
Telephony Modem. Indicator color is not important.
Using the Reset Button
Use the
Reset
button, on the back of the Telephony Modem, to reset the modem
as if you power cycled the unit. You may need to reset the Telephony Modem if you
are having problems connecting to the Internet. Using this button will be rare.
Use a pointed
non-metallic
object to press this button. The photo to the left shows
the location of the
Reset
button. The
Reset
button is recessed to prevent acci-
dental resets.
Model TM822S only:
The rear panel power switch can also be used to power cycle
the unit.
DS
US
Online
Description
Flash
Off
Off
Downstream search
On
Flash
Off
Downstream found; upstream search
On
On
Flash
Downstream and Upstream found;
retrieving setup information from cable
operator
On
On
On
Ready for service
Touchstone TM822 Telephony Modem User’s Guide
35
Reset
Tel 2
Tel 1
Ethernet
10/100/1000
Cable
TM822A
Reset
Tel 2
Tel 1
Ethernet
10/100/1000
Cable
TM822S
Reset
Button
Power
Switch
