Chapter 3
:
Installing and Connecting your Telephony Gateway
Release 16 STANDARD 1.0 May 2016
Touchstone TG1652S Telephony Gateway User Guide
© ARRIS Enterprises, LLC, 2016. All Rights Reserved.
17
Rear Panel
The rear of the Telephony Gateway has the following connectors and controls.
1.
Reset button: resets the Telephony Gateway as if you power cycled the unit. Use a
pointed non-metallic object to press this button.
2.
Telephone 1: connector for the first phone line.
3.
Telephone 2: connector for the second phone line.
4.
Ethernet (1 - 4): connectors for use with a computer LAN port.
5.
Cable: connector for the coaxial cable.
6.
Power: connector for the power cord.
7.
Power switch: power on/off switch.
Selecting an Installation Location
There are a number of factors to consider when choosing a location to install your Telephony
Gateway:
Is an AC outlet available nearby? For best results, the outlet should not be switched and
should be close enough to the Telephony Gateway that extension cords are not required.
