manualshive.com logo in svg

Arris TM02AA104, Руководство по установке

Поделиться
Скачать
Arris TM02AA104 Скачать руководство пользователя страница 11

About this document  

 xi

Telephony Modem Installation Guide Release 4 Standard 3.0 Aug 2004

The FCC advises that any unauthorized changes or modifications may void the 

user’s authority to operate this equipment. For more information on FCC 

conformity, please contact: ARRIS, 3871 Lakefield Drive, Suite 300, 

Suwanee, GA 30024.

This product was FCC certified under test conditions that included the use of 

the supplied cables between system components. To ensure compliance with 

FCC regulation, the user must use these cables and install them properly. 

Product Safety

UL listed per UL60950.

European Compliance

This product complies with the provisions of the Electromagnetic 

Compatibility (EMC) Directive (89/336/EEC), the Amending Directive 

(92/31/EEC), the Low Voltage Directive (73/23/EEC), and the CE Marking 

Directive (93/68/EEC). As such, this product bears the CE marking in 

accordance with the above applicable Directive(s).

A copy of the Declaration of Conformity may be obtained by contacting: 

ARRIS, 3871 Lakefield Drive, Suite 300, Suwanee, GA 30024.

Содержание TM02AA104





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды