ARRI SkyPanel, Руководство пользователя

Страница: 36 / 72

Art
-Net
36
Art-Net
From firmware version 2.0 the SkyPanel supports Art-Net. Art-
Net is a network protocol for controlling devices.
Art-Net supports all modes of the SkyPanel.
Here is a brief explanation of some basic terms being used by
Art-Net. For more detailed information, please visit the web site
of the Art-Net developers: www.artisticlicence.com.
Art-Net IP Address
When setting the IP address manually, please take care the the
address is in the range 2.0.0.1 to 2.255.255.255 (Network
switch off) or 10.0.0.1 to 10.255.255.255 (Network switch on).
Any other range is not according to the Art-Net standard and
problems might occur.
Art-Net Net
A group of 16 consecutive Sub-Nets or 256 consecutive Uni-
verses is referred to as a net. There are 128 Nets in total.
Sub-Net
A group of 16 consecutive universes is referred to as a sub-
net. (Not to be confused with the subnet mask).
Universe
A single DMX512 frame of 512 channels is referred to as a
Universe.
Art-Net Merge Mode
The Art-Net protocol allows multiple nodes or controllers to
transmit ArtDmx data to the same universe.Merging is limited
to two sources, any additional sources will be ignored by the
Node.
Art-Net Gateway
With enabled Art-Net gateway the SkyPanel makes all 512
channels of the used universe available at its DMX connectors.
Please follow the information given in chapter “DMX” on
page 37 when using the DMX data.
The menu „Art-Net Settings“ contains all parameters to set up
a SkyPanel in an Art-Net network. Please find a detailed de-
scription in the chapter “Fixture Menu” on page 38.