ARRI ARRIFLEX 435 ES, Инструкция по эксплуатации

Страница: 90 / 143

Accessories
90
Ramping with the ARRIFLEX 435
The ARRIFLEX 435 is, unlike the ARRIFLEX 435ES, not
equipped with an electronically adjustable shutter.
Therefore exposure compensation through parallel adjustment
of the shutter angle during frame rate changes is not possible.
Speed Ramping with the ARRIFLEX 435
Note: This description does not apply
to the ARRIFLEX 435ES
• Depress key “7” to change to the PROGRAM menu.
• With keys “1” to “6”, activate one of the available
memory areas.
• Depress the “E”-key. The values can now be edited.
• Enter the desired starting frame rate.
If the digits after the decimal point need not be entered,
complete the entry with the “ENTER”-key.
• Confirm the displayed shutter angle (value should be bet-
ween 11.2
°
and 180
°
) with the “ENTER”-key.
This value will not be transferred to the camera as the
mirror shutter of the ARRIFLEX 435 is not electronically
adjustable.
• Enter the desired end frame rate.
If the digits after the decimal point need not be entered,
complete the entry with the “ENTER”-key.
• Confirm the displayed shutter angle (value should be bet-
ween 11.2
°
and 180
°
) with the “ENTER”-key.
This value will not be transferred to the camera as the
mirror shutter of the ARRIFLEX 435 is not electronically
adjustable.
• Enter the desired ramp time.
If the digit after the decimal point needs not be entered,
complete the entry with the “ENTER”-key.
• Transfer the program to the camera by depressing the
“SEND”-key.
Note: A program previously stored in the camera will
be erased by this process.