ARRI ARRIFLEX 435 ES, Инструкция по эксплуатации

Страница: 22 / 143

Power Supply
22
11-pin accessory socket overload warning LED
Mains Unit NG 12/26 R
Use of the mains unit is recommended for filming in the studio
and when using electronic accessories with a high power
consumption. It is suitable for frame rates up to 150 fps.
• First check that the correct mains voltage is set on the
mains unit.
• Ensure that the main switch on the camera is off.
• Set the voltage switch on the mains unit to 26 V.
• Plug the battery cable KC 20S or the spiral battery
cable KC 29S into the power supply socket on the
camera and into the 26 V-socket on the mains unit.
Note: The NG 12/24 R can easily be upgraded to an
NG 12/26 R at an ARRI service center.
Accessory Power Supply
12 V Accessories
12 V accessories can be attached to the 11-pin accessory
socket
➪
photo which provides stabilized 12 V DC with
3 A maximum continuous current and 5 A peak load.
Note: The 11-pin accessory socket can only be used as
an output socket. Accessories that feed signals
into the camera will not function at this socket.