manualshive.com logo in svg

ARRI ARRIFLEX 435 ES, Инструкция по эксплуатации

Поделиться
Скачать
ARRI ARRIFLEX 435 ES Скачать руководство пользователя страница 119

119

Maintenance

safety plate

tongue

Cleaning the Field Lens

• By briefly depressing the “PHASE”-button, the shutter is

positioned to protect the mirror surface from damage as
far as possible.

• Before cleaning the field lens, switch the camera’s main

switch off and disconnect the camera from the power
supply!

• Remove the lens or the protective cap.

Do not touch the mirror surface!

• Pull the ground glass 

➪ 

photo

 out of the holder by its

tongue 

➪ 

photo

 using the special forceps.

• Push the safety plate 

➪ 

photo

 upwards with a screw-

driver.

• Pull the field lens 

➪ 

photo

 out off the holder by its tongue

➪ 

photo

 using the special forceps.

• Clean the field lens with a dry, lint-free cloth.
• Make sure that the frame is completely clean.

• Using the special forceps, push the field lens as far as it

will go into the holder. A ball catch fixes the field lens in
the correct position.

• Push the safety plate 

➪ 

photo

 down again with the

screwdriver.

• Check if the ground glass to be used and the ground glass

frame are completely clean.

• Using the special forceps, push the ground glass into the

holder as far as it will go. A ball catch fixes the ground
glass in the correct position.

• Check that the ground glass is locked in place.

field

lens

Содержание ARRIFLEX 435 ES
















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды