ARRI Arriflex 435 Advanced, Инструкция по эксплуатации, Страница: 91 / 156

91
All selected frame rates within the acceptable range can be
fine-tuned, from 1 to 99.999 fps in increments of 0.001 fps,
above 100 fps in increments of 0.01 fps. This can be done
in standby or while the camera is running.
To carry out a fine-tuning of the frame rate:
• Switch the sliding switch on the camera to PS/CCU.
• Pre-select the frame rate.
• Depress key “9” in the SPEED menu.
• Switch the camera to Mode 2.
• Carry out fine-tuning:
Increase frame rate with key F1
Decrease frame rate with key F2
• Exit fine-tuning with the “EXIT”-key.
The SHUTTER Menu
With the SHUTTER menu, shutter angles within acceptable
range of 11.2
°
to 180
°
can be set as desired with an accu-
racy of 0.1
°
. The shutter angle can be changed in standby
or while the camera is running. In the upper line the shutter
angle currently set on the camera control unit is displayed,
below that the shutter angle of the camera.
• Using keys “1” to “7”, select one of the standard shutter
angles listed in the SHUTTER menu. The selected shutter
angle is displayed in the uppermost line.
• Transfer the selected value to the camera with the
“SEND” key.
Alternatively, other shutter angles within the acceptable
range can be entered directly:
• Depress key “9” (VAR) in the SHUTTER menu.
• Enter the desired shutter angle.
• If the digit after the decimal point is to have the value 0,
this needs not be entered. Complete the input with the
“ENTER”-key. The selected shutter angle is displayed
in the uppermost line on the CCU.
• Transfer the chosen value to the camera with the
“SEND”-key.
Accessories