ARRI Arriflex 435 Advanced Скачать руководство пользователя страница 52

Страница: 52 / 156

ARRIGLOW

Attaching ARRIGLOW

The ARRIGLOW module is available as an option. It allows
illuminated format markings to be superimposed onto the
viewfinder image with continuously adjustable brightness.
• Loosen both fastening screws

➪

photo

on the warning

display module.

• Pull the warning display module off sideways.

Attach the ARRIGLOW module straight.
Attaching at an angle could damage the plug.

• Push on the ARRIGLOW module

➪

photo

• Screw both fastening screws tight.

Adjusting ARRIGLOW Brightness

The brightness of the illuminated format markings can be
continuously adjusted by turning the adjustment knob

➪

photo

By turning the adjustment knob counter-clockwise as far
as it will go, the ARRIGLOW can be turned off.

Optics

fastening

screws

ARRIGLOW module

Содержание Arriflex 435 Advanced





























































































































































Результаты поиска

Содержание Arriflex 435 Advanced

Отзывы:

ARRI Arriflex 435 Advanced, Инструкция по эксплуатации, Страница: 52 / 156

Результаты поиска

Содержание Arriflex 435 Advanced

Отзывы: