ARRI Arriflex 435 Advanced Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 156

ARRI Arriflex 435 Advanced Скачать руководство пользователя страница 51

51

Image Compensation

The viewfinder system is fitted with an automatic image com-
pensation mechanism.
To enable setting a different image position in certain situ-
ations, the viewfinder system is additionally equipped with
a manual image adjustment mechanism.

Manually Adjusting Image Compensation

• Depress the locking key

➪

photo

and hold depressed.

• Turn the adjustment knob

➪

photo

until the viewfinder

image is in the desired position.

Reactivating Image Compensation

• Turn the adjustment knob

➪

photo

until this locks in

position. Do not depress the locking key.

Note:

The automatic image compensation locks in two
positions, 180

°

apart. This allows the image

compensation to be set to provide an upright
image when using a finder extension.

If the viewfinder image is inverted without the finder exten-
sion, the image compensation must be adjusted to the oppo-
site locking position.

Inverting the Image

• Depress the locking key

➪

photo

and keep depressed.

• Turn the adjustment knob

➪

photo

approx. 30

°

• Release the locking key

➪

photo

.

• Keep turning the adjustment knob

➪

photo

until this

locks in position.

Pivoting the Contrast Filter

To enable a subjective reduction of viewfinder contrast, a
contrast filter (ND 6) can be pivoted into the optical beam
path by means of a lever

➪

photo

.

• The lever

➪

photo

is brought into the “ON” position

automatically by depressing the locking key

➪

photo

.

• For unrestricted viewing, turn the lever

➪

photo

back

into the “OFF” position until it locks in.

Optics

lever

adjustment knob

locking key

for contrast filter

locking key

«
...
49
50
51
52
53
...
»

Содержание Arriflex 435 Advanced





























































































































































Отзывы:

Нет отзывов