manualshive.com logo in svg

ARRI Arriflex 435 Advanced, Инструкция по эксплуатации, Страница: 16 / 156

Поделиться
Скачать
ARRI Arriflex 435 Advanced Скачать руководство пользователя страница 16

16

Lens Support

The lens support consists of the lens support LS-7 (can be
snapped onto 19 mm support rods) 

➪ 

photo

 or the lens

support LS-8 (can be pushed onto 15 mm support rods) and
the respective lens support ring 

➪ 

photo

 for the lens in use.

• Mount the lens support onto the support rods from above

and let it click into place by applying slight pressure
(push the LS-8 onto the support rods from the front).

• Slide the relevant support ring 

➪ 

photo

 onto the lens

but do not tighten.

• Then slide the lens into the lens mount receptacle and lock.
• Connect the support ring to the lens support and

tighten the knurled screw 

➪ 

photo

 as well as the

clamping lever 

➪ 

photo

.

• Complete the process by tightening the clamp screw

➪ 

photo

 on the support ring.

Note:

Mounting the support ring on the relevant lens is
usually carried out only once. The support ring
can then remain in position on the lens.

Installation

lens support ring

clamp screw

lens support

LS-8

lens support

LS-7

knurled

screw

clamping lever

wedge plate

base

plate

Содержание Arriflex 435 Advanced





























































































































































Отзывы:

Нет отзывов