ARRI Arriflex 435 Advanced, Инструкция по эксплуатации, Страница: 13 / 156

13
4. Installation of the Camera
Packing and Transport
In order to prevent damage to the mirror shutter,
a protective cap must be on the lens mount
receptacle at all times.
When transporting the camera, pay attention that
the movement is in the locked position
➪ photo .
If the ARRIFLEX 435 Advanced is transported or
stored without a magazine, the magazine
opening cover
➪ photo should be attached.
Loaded or empty magazines should only be trans-
ported or stored with the loop protector
➪ photo
attached to avoid damage to the film stock and
the magazine throat assembly.
Tripod Heads
The following tripod heads are suitable for use with the
435 Advanced:
• ARRIHEAD
• ARRIHEAD 2
• ARRIHEAD 2 with integrated encoders
• ARRI Fluid-Heads
• Sachtler Studio 7, 150 H
• Mitchell-Head
• Moy-Head
• Ronford F7
• Hot-Head
• Cam-Remote-Head
• Worall-Head
In applications where the camera mount is subject
to high forces (e.g. helicopter mounts) the camera
must be additionally secured with retaining cords.
All fastening screws must be tightened firmly with
an appropriate screwdriver (not with the commonly
used coin!).
Installation