
17
Magazines
Never close the door when the locking latch is
in position „closed“ as otherwise the latch
could be damaged. Never hold the magazine
by the door as otherwise the hinge could be
damaged.
Removing the Loop Protector
• Using slight pressure push the loop protector upwards.
• Swing out the lower side and remove the loop protector.
Attaching the Loop Protector
• Engage the upper side of the loop protector from
below into the pilot pin
on the magazine.
• Swing the loop protector into the magazine, and with
slight pressure push in to lock.
Magazine Door
The magazine door can only be opened or closed if the
magazine has been removed from the camera.
Opening the Magazine Door
• Open the locking latch
.
• Hold down the red safety knob
depressed and
turn the locking latch to „A/O“.
• Pull on the locking latch to open the magazine door.
Closing the Magazine Door
• Make sure that the locking latch is in position „A/O“.
• Push the magazine door firmly and turn the locking
latch clockwise to the locked position - the safety knob
locks audibly into place.
safety push button
magazine cover lock
Содержание ARRIFLEX 16SR3
