manualshive.com logo in svg

Arnott MC-2913, Руководство по установке

Поделиться
Скачать
Arnott MC-2913 Скачать руководство пользователя страница 1

1

REV 3 

 

10/08/2018

11-MC-VICT1

KIT # MC-2913, MC-2927

FOR 2010-PRESENT

VICTORY

® 

TOURING 

SERIES

Arnott

®

 is committed to the quality of its products. If you have a question or problem with any Arnott product, 

please contact Arnott by calling 800-251-8993 during normal business hours or email [email protected].

(In the EU please call +31 (0)73 7850 580 or email [email protected]).

WARNING:

 

DO NOT inflate the air suspension system until it is installed. Inflation of the air suspension system 

before both ends are supported by the motorcycle’s frame and/or appropriate suspension components may result in 

serious personal injury and/or damage to the air suspension system. The maximum recommended air spring inflation 

pressure is 200 psi.

Congratulations on your purchase of an Arnott

®

 Motorcycle Air Suspension system. This system provides 

you with the ability to maintain your bike at a constant level regardless of load, resulting in enhanced vehicle 

ride, handling, and performance. We at Arnott Incorporated are proud to offer a high quality product at the 

industry’s most competitive pricing. Thank you for your confidence in us and our product. 

Proper installation is essential to experience and appreciate the benefits of this system. Please take a moment 

to review these installation instructions before you begin to install these components on your motorcycle. 

The removal and installation of air suspension products should only be performed by a fully qualified, ASE 

Certified, professional.

It is equally important to be aware of all necessary safety measures while installing your new Air Suspension 

System. This includes proper lifting and immobilizing of the motorcycle and isolation of any stored energy to 

prevent personal injury or property damage.

"Elevate Your Ride"

Содержание MC-2913
















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды