Specifications
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
USER MANUAL
FLASHLIGHTS IN THE WORLD
THE MOST TECHNICALLY ADVANCED
Armytek Optoelectronics Inc.
is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan.
.
10 years no-hassle warranty
§
Amazingly powerful
multi-flashlight
with 1
250
LED
l
umens
brightness powered by only one 18650 Li-Ion battery.
§
T
IR optics with light angles 70°:120° for wide light without a “tunnel vision” effect.
§
R
eliable headband made of soft elastic material for comfortable fixation of the lamp on the head.
§
E
asy operation and 6 convenient brightness modes.
§
D
ue to a side switch button you can operate the
multi
-
flashlight
easily with one
hand without shifting it aside.
§
Compact and light-weight but at the same time durable and multi-functional
flashlight
.
§
Record runtimes
–
up to 1
00
days of operation on one battery.
§
R
emovable clip for fixation on a belt and flat tailcap for vertical standing.
§
C
omp
l
ete correspondence to the highest standards of durability and reliability: the
multi
-
flashlight
easily withstands fallings,
impacts and vibrations.
Wizard
Warnings
We DO NOT RECOMMEND to use
CR123A
batteries as a power source for often and continuous flashlight’s operation.
Remember that old or low-quality disposal batteries can be damaged under heavy load and explode.
Specifications are subject to change without notice.
* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.
Model
Wizard
LED / Optics
Cree
XP-L or XM-L2
/ TIR
Brightness stabilization type
DIGITAL (CPU brightness control)
Light output, LED / OTF lumens*
1250 / 1000
Peak beam intensity, candelas
3560
Hotspot / spill
70
°
/
1
2
0°
Beam distance*
119 meters
Modes, light output (OTF
lumens*) and runtimes
(measured with 18650 Li-Ion
3400mAh until the light output
drops to 10% of the initial
value)
Turbo
100
0 lm / 1.5h
Main3
39
0
lm /
3
.8h
Main2
180 lm / 9h
Main1
30 lm / 48h
Firefly2
2.3 lm / 18d
Firefly1
0.4 lm / 100d
Power source
1x18650 Li-Ion / 2x
18350
Li-ion /
2xRCR123 Li-ion / 2xCR123A
Size and weight (without batteries)
Length 101mm, body diameter 24.5mm, head diameter 29mm, weight 48g
Armytek Optoelectronics Inc.
Web: www.armytek.com Email:
Address:
13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada
Care and Storage
Service and Warranty
Armytek provides free warranty repair for 10 years from the
date of
purchase.
Warranty doesn't cover damage caused by:
1.
Improper usage.
2.
Attempts to modify or repair the flashlight by nonqualified specialists.
3.
Longtime application in chlorinated or polluted water, or other liquids (other than water).
4.
High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5.
Usage of low-quality batteries.
1.
Always follow the instructions from this manual and recommendations on battery usage.
2.
Apply only the recommended power sources.
3.
Do not reverse battery polarity.
4.
Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5.
Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6.
Do not allow water or any other liquid to leak into the flashlight.
7.
Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8.
Do not allow children to use the flashlight without your assistance.
The producer will
not be liable for any harm done to the user if it was caused by
improper use of the product.
It is recommended to clean the threads and O-ring
s
off dirt and old grease
once or twice per year. Remember that
reliable
protection
from water and dust cannot be provided by worn out sealing.
The
fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings.
To clean the threads do the following:
1.
Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2.
Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3.
Clean the metal threads with a brush using ethanol. Be careful not to allow
the
applied liquid to get inside the flashlight or tailcap as
it can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required
.
The flashlight will get hot in Turbo mode quickly and discharge the battery by high current.
Don't leave it without your attention as very
bright light can heat objects and be a cause of the fire.
