IW-YP12585-2
INSTRUCTIONS MANUAL
FEATURES
SELECTING FEATURES
SETTING THE TIME AND CALENDAR
STOPWATCH
SPLIT TIME
•
Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the
Week)
•
24 Hour Alarms
•
Hourly Chime
•
Calendar Mode
•
Chronograph Mode: Hours, Minutes, Seconds, and 1/100 of a sec-
ond with Lap Operation
•
Water Resistant as indicated on the watch
•
INSTALITE - Electro Luminescent Display
NOTE:
Please note that your watch may have a different outlook on the
display than this diagram. However, the functions and operation are the
same as these instructions.
1.
Time Telling Mode displays Hours, Minutes, Seconds, and Day of the
Week.
2.
From Time Telling Mode, press ‘B’ once. Chronograph Mode appears.
Press ‘B’ three times to return to Time Telling Mode.
3.
From Time Telling Mode, press ‘B’ twice. Alarm Mode appears. Press ‘B’
twice to return to Time Telling Mode.
4.
From Time Telling Mode, press ‘B’ three times. Time Setting Mode ap-
pears. Press ‘B’ once to return to Time Telling Mode.
5.
From Time Telling Mode, press and hold ‘C’ to enter Calendar Mode.
The Month, Date, and Day of the Week appear. Release ‘C’ to return to
Time Telling Mode.
1.
From Time Telling Mode, press ‘B’ three times. Seconds flash. Press ‘C’
to zero out the Seconds.
2.
Press ‘A’. Minutes flash. Press ‘C’ to advance the Minutes.
3.
Press ‘A’. Hours flash. Press ‘C’ to advance the Hour.
NOTE:
Pressing and holding ‘C’ will advance digits rapidly. When 12 Hour
Format is selected, ‘A’ indicates ‘a.m.’ times; ‘P’ indicates ‘p.m.’ times.
4.
Press ‘A’. The Date flashes. Press ‘C’ to advance the Date.
5.
Press ‘A’. The Month flashes. Press ‘C’ to advance the Month.
6.
Press ‘A’. The Day of the Week flashes. Press ‘C’ to advance the Day of
the Week.
7.
Press ‘B’ to end set sequence and return to Time Telling Mode.
1.
From Time Telling Mode, press ‘B’ once to enter the Stopwatch Mode.
2.
Press ‘C’ to start timing.
3.
Press ‘C’ again to stop timing.
4.
Press ‘A’ to reset to zero.
5.
Press ‘B’ to return to Time Telling Mode.
1.
While in the Stopwatch Mode, press ‘C’ to start timing.
2.
Press ‘A’ to measure and display Split Times.
3.
Press ‘C’ to stop timing at the end of the event.
4.
Press ‘A’ to reveal the final Split Time.
5.
Press ‘A’ to reset to zero.
5.
Press ‘B’ to return to Time Telling Mode.
SETTING THE 24 HOUR ALARMS
1.
From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode. Alarm
Hours flash.
2.
Press ‘C’ to advance the Alarm Hour.
NOTE:
Pressing and holding ‘C’ will advance digits rapidly.
3.
Press ‘A’. Alarm Minutes flash. Press ‘C’ to advance the Alarm Minute.
4.
Press ‘B’ to end set sequence and return to Time Telling Mode.
ACTIVATING ALARM + HOURLY CHIME
EL LIGHT FEATURE
1.
From Time Telling Mode, press and hold ‘A’ and press ‘C’ once. The
Alarm Symbol appears to indicate that the Alarm is activated and will
sound at the preset Alarm Time for about 60 seconds or until ‘A’ is pressed.
2.
Press and hold ‘A’ and press ‘C’ once again to deactivate the Alarm.
3.
From Time Telling Mode, press and hold ‘A’ and press ‘B’ once. All of the
Days of the Week appear to indicate that the Hourly Chime is activated and
will sound every hour on the hour.
4.
Press and hold ‘A’ and press ‘B’ once again to deactivate the Hourly
Chime.
SNOOZE:
Press ‘D’ to stop the Alarm for 5 minutes. The Alarm sound will
resume after 5 minutes. Press ‘D’ again to stop the Alarm for another 5
minutes.
5.
Press ‘A’ and ‘C’ again to deactivate the Alarm.
1.
Press ‘D’ in any mode to illuminate the watch face. The backlight will
remain lit for 3 seconds.
NOTE:
EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE.
