ZD1015
LIMITED LIFETIME WARRANTY & INSTRUCTIONS MANUAL
FEATURES
SELECTING FEATURES
SETTING THE TIME AND CALENDAR
EL LIGHT FEATURE
STOPWATCH
•
Time Telling Mode (Hours, Minutes, Seconds, and Date)
•
(2) 24 Hour Alarms
•
Hourly Chime: One ‘Beep’ sound every full Hour
•
Chronograph: Hours, Minutes, Seconds, and 1/100 of a Second with
Lap Operation
•
Countdown Timer
•
World Time
•
Daylight Savings Time
•
12/24 Hour (Military Time)
•
Water Resistant as indicated on the watch
•
INSTALITE- Electro Luminescent Display
1.
Time Telling Mode displays Hours, Minutes, Seconds, Month, Date, and
Day of the Week.
2.
From Time Telling Mode, press ‘B’ once. Chronograph Mode appears.
Press ‘B’ five times to return to Time Telling Mode.
3.
From Time Telling Mode, press ‘B’ twice. Timer Mode appears. Press ‘B’
four times to return to Time Telling Mode.
4.
From Time Telling Mode, press ‘B’ three times. World Time Mode ap-
pears. Press ‘B’ three times to return to Time Telling Mode.
5.
From Time Telling Mode, press ‘B’ four times. Alarm One (A1) Mode
appears. Press ‘B’ twice to return to Time Telling Mode.
6.
From Time Telling Mode, press ‘B’ five times. Alarm Two (A2) Mode
appears. Press ‘B’ once to return to Time Telling Mode.
Analog
1.
Pull the Crown, ‘E’, out. The second hand stops. Rotate the Crown in ei-
ther direction until the desired time is obtained. Push the Crown back in to
re-engage time keeping.
Digital
1.
From Time Telling Mode, press and hold ‘A’. The City Code flashes.
Press ‘C’ to select the City Code.
2.
Press ‘B’. Daylight Savings Time flashes. Press ‘C’ to activate or deacti-
vate Daylight Savings Time.
NOTE:
Zeroing out 30 or more seconds automatically adds one minute to
time.
4.
Press ‘B’. Hours flash. Press ‘C’ to advance the Hours.
NOTE:
When 12 Hour Format is selected, ‘P’ indicates ‘p.m.’ times; there
is no indicator for ‘a.m: times.
5.
Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
NOTE:
Pressing and holding ‘C’ will advance digits rapidly.
6.
Press ‘B’. The Year flashes. Press ‘C’ to advance the Year.
7.
Press ‘B’. Months flash. Press ‘C’ to advance the Month.
8.
Press ‘B’. The Date flashes. Press ‘C’ to advance the Date.
9.
Press ‘B’. 12/24 Hour Time Format flashes. Press ‘C’ to select either 12
Hour or 24 Hour (Military) Time.
NOTE:
‘12’ indicates 12 Hour Format; ‘24’ indicates 24 Hour (Military
Time).
10.
Press ‘A’ to end sequence and return to Time Telling Mode.
1.
Press ‘D’ in any mode to illuminate the watch face. The backlight will
remain lit for 3 seconds.
NOTE:
Excessive use of the light will shorten battery life.
1.
From Time Telling Mode, press ‘B’ once to enter the Stopwatch Mode.
2.
Press ‘C’ to start timing.
3.
Press ‘C’ again to stop timing.
4.
Press ‘A’ to reset to zero.
5.
Press ‘B’ to return to Time Telling Mode.
SPLIT TIME
WORLD TIME
COUNTDOWN TIMER
1.
While in the Stopwatch Mode, press ‘C’ to start timing.
2.
Press ‘A’ to measure and display Split Times.
3.
Press ‘C’ to stop timing at the end of the event.
4.
Press ‘A’ to reveal the final Split Time.
5.
Press ‘A’ again to reset to zero.
6.
Press ‘B’ to return to Time Telling Mode.
1.
From Time Telling Mode, press ‘B’ three times to enter the World Time
Mode.
2.
Press ‘C’ to select the desired city. Based on the set time, the Hour is
automatically adjusted to display the local time in the newly selected city.
NOTE:
One of 35 major cities may be selected:
(PPG) Samoa, (HNL) Honolulu, (ANC) Anchorage,
(LAX) Los Angeles, (DEN) Denver, (CHI) Chicago,
(NYC) New York, (CCS) Caracas, (RIO) Rio de Janeiro,
(RAI) Praia, (GMT) Greenwich, (LON) London,
(PAR) Paris, (BER) Berlin, (ATH) Athens, (CAl) Cairo,
(JRS) Jerusalem, (JED) Jeddah, (MOW) Moscow,
(THR) Tehran, (DXB) Dubai, (KBL) Kabul, (KHI) Karachi,
(DEL) Delhi, (DAC) Dacca, (RGN) Yangon, (BKK)
1.
From Time Telling Mode, press ‘B’ twice to enter the Timer Mode.
2.
Press and hold ‘A’. Hours flash. Press ‘C’ to adjust the Hour.
3.
Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
4.
Press ‘B’. Seconds flash. Press ‘C’ to adjust the Seconds.
5.
When the Countdown Timer is set, press ‘A’ to end set sequence and
return to Timer Mode.
6.
Press ‘C’ to start the Countdown Timer.
7.
If desired, press ‘C’ again to stop the Countdown
NOTE:
The Countdown timing will continue in any mode until ‘C’ is
pressed. During the last 10 seconds of the countdown, the alarm will beep
once per second. When the Timer has expired, the alarm will sound for
about 10 seconds or until any button is pressed. If no button is pressed,
the Timer will count up for 5 minutes.
8.
Press ‘C’ to stop the Timer.
9.
Press ‘B’ to return to Time Telling Mode.
