PRODUCT ASSEMBLY INSTRUCTIONS
Item#: ASTORIA QUEEN BEDFRAME
#
Picture
Description
Quannity
A
Headboard
1
B
Siderail
2
C
Footboard
1
D
Middle Support Bar
1
E
Slat
16
F
Frame Bracket
4
G
Leg Set
2
H
Middle Leg
2
I
Bolt - M8 x 20
48
K
Washer - Ø19 mm
48
L
Lock Washer - Ø12 mm
48
M
Allen key Wrench V4
1
N
Bolt - M8 x 40 mm
2
O
Bolt - M6 x 90 mm
4
P
Insert Nut - M6-thread
4
Q
Srew - M4 x 30
8
R
Dowel - Ø10 x 30
8
S
Washer - Ø16
4
T
Lock Washer - Ø12
4
·
Step 1: Make sure it's on a safe surface where the bedframe cannot be
scratched and or damaged and close enough to the location
·
Step 2: Locate the headboard and the two frame brackets, as these will
be the first to be attached.
·
Step 3: Using the Allen Key you will screw in the headboard and the
frame brackets using (4 Bolt - M8 x 20mm; 4 Lock Washer -Ø12mm; 4
Washer - Ø19mm) for each bracket. First place the two washers and
bolt on the interior of the frame using the Allen Key.
i. Repeat for each bracket and make sure it's firmly attached to the
headboard.
ii. Locate the dowel, and place 1 on each bracket on the outside of
the bracket.
·
Step 4: Locate the leg set as this will be
assembled onto the preassembled heard board
and rails.
·
Step 5: Using the Allen Key you will screw in
the headboard and the one set of leg using (4
Bolt - M8 x 20mm; 4 Lock Washer -Ø12mm; 4
Washer - Ø19mm) for each bracket. First place
the two washers and bolt on the interior of the
frame using the Allen Key.
M
I
L
K
G
M
I
L
K
A
R
F
F
Helpers needed to assemble: 2
Estimate time frame to assemble: 1 Hour
Tools Needed not Included: Phillips Screwdriver
