System Control
ARM DDI 0388I
Copyright © 2008-2012 ARM. All rights reserved.
4-3
ID073015
Non-Confidential
4.2
Register summary
This section gives a summary of the CP15 system control registers. For more information on
using the CP15 system control registers, see the
ARM Architecture Reference Manual.
The system control coprocessor is a set of registers that you can write to and read from. Some
of these registers support more than one type of operation.
This section describes the CP15 system control registers grouped by CRn order, and accessed
by the
MCR
and
MRC
instructions in the order of CRn, Op1, CRm, Op2:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
All system control coprocessor registers are 32 bits wide, except for the Program New Channel
operation described in
PLE Program New Channel operation
. Reserved registers
are RAZ/WI.
In addition to listing the CP15 system control registers by CRn ordering, the following
subsections describe the CP15 system control registers by functional group:
•
•
Virtual memory control registers
•
•
Other system control registers
•
•
Address translation operations
•
•
•
•
•
•