ARLYN UPSCALE – QUICKSTART GUIDE
USER MANUALS & SOFTWARE
Manuals:
http://www.arlynscales.com/Product-Manuals-Specification-Sheets
[
Arlyn UpScale User Manual
–
Instructions, Options Guide and Limited Warranty Terms]
[
Arlyn UpScale Parts Counting Manual
–
For Parts Counting Scales with Arlyn UpScale]
Software:
http://www.arlynscales.com/software-downloads/
[
Arlyn UpScale USB Drivers
–
Software drivers for USB Communication (if equipped)]
[
Arlyn UpScale USB PC App (RS232, USB)
–
Sample App for testing RS232 and USB connectivity for Arlyn UpScale]
[
Arlyn UpScale TCP/IP PC App (Ethernet, Wi-Fi)
–
Sample App for testing Ethernet and Wi-Fi connectivity for Arlyn UpScale]
[
Realterm (Windows Terminal)
- Windows Terminal app for troubleshooting connectivity]
INITIAL SETUP AND OPERATION
1)
Carefully unpack scale parts from shipping carton. Depending on the model of the scale you have, the touchscreen
indicator, accessories (e.g. relays) and platform maybe shipped in separate boxes.
2)
Extend/unscrew the platform’s leveling legs.
Leveling legs must be adequately extended out and levelled for the scale to
function properly.
3)
Assemble the scale as shown in the diagram below. Depending on the model of the scale:
a.
The platform may need to be connected to the indicator through the provided connector (USB or DIN). Use a USB
extender if necessary.
b.
The indicator is already connected to the platform.
4)
Plug the micro-USB end of the power adapter into the power pigtail, and the other end into 110-117VAC. This is the only
way to power up the indicator after shutting down. Wait for the indicator to boot up until it shows the main weight screen.
5)
Press the ZERO button if the scale is not showing ZERO.
SETUP DIAGRAM
ARLYN UPSCALE
– SETUP DIAGRAM
0.00
PLATFORM
INDICATOR
Power Supply
Platform Cable
Platform Cable
– Connects the PLATFORM to the INDICATOR through HDMI connector.
Power Supply
– Connects the INDICATOR to your power outlet. Supplies power to the whole system
RS232 (Optional)
– Connects to your PC/PLC RS232 connector.
Setpoint (Optional)
– Connects to the Relay Box enclosure.
Relay Box (Optional)
– Contains AC or DC Relays for controlling your system.
RS232
Setpoint
RELAY BOX
Leveling Legs
V1.9.04
2
