5
6
Introduction
The Wireless Door Chime (DC687)
consists of two separate units:-
1. Push Button Unit
(Transmitter)
2. Chime Unit
(Receiver)
These units are completely
self-contained and no wiring between
them is necessary.
Range
Up to 100 metres.
NOTE: Range depends on location,
temperature, and battery condition.
Socket Outlet Output
230-240v a.c. 10amp 2400w max.
6. Clean only with a damp cloth and mild detergent. Do not use solvents.
7. In an event of power outage, surge or unstable main power supply,
your door chime will default to factory setting. Please reset the unit
according to ‘Resetting the Unit’.
Security
When you are away from home for long periods you may wish to leave
your Chime Unit with one of your neighbours so that they can monitor
callers to your house during your absence.
Trouble Sooting & User Hints
Problem
Possible Cause
Suggested Remedy
Chime does
not sound.
1. Units are out of range
(max. range 100m).
Operate the Chime unit within the
operation range (100m).
2. Push Button and Chime
units are not on same
frequency coding.
Re-set the frequency coding
(see Code Selection) or select a
different tone (see Tone Selection).
3. Flat Push Button battery.
Change the battery.
4. Wrong polarity of battery
in Push Button.
Re-insert battery with polarity to
match markings.
5. Power outage, surge or
unstable main power
supply.
Re-set unit according to
‘Resetting the Unit’
Chime sounds
without Push
Button being
pressed
1. A power interruption
to the Door Chime unit
plus a similar door chime
product operating nearby
has caused the chime unit
to reset to the incorrect
House Code
A. Switch off the Chime Unit for at
least 1 minute. Switch on again.
It should beep twice. Press
the Push Button to operate the
chime. This re-sets the House
Code in the Chime Unit or;
B. Re-set the frequency coding
(see Code Selection
2. A similar Wireless
Door Chime product is
operating nearby on the
same House Code
Re-set the House Code
(see Code Selection).
3. Interference from CBs,
Taxis or remote control
toys operating on the
same frequency.
Re-set the House Code
(see Code Selection).
Warranty
Arlec guarantees this product in accordance with the Australian Consumer Law.
Arlec also warrants to the original first purchaser of this product (“you”) from a retailer that
this product will be free of defects in materials and workmanship for a period of 12 months
from the date of purchase; provided the product is not used other than for the purpose,
or in a manner not within the scope of the recommendations and limitations, specified by
Arlec, is new and not damaged at the time of purchase, has not been subjected to abuse,
misuse, neglect or damage, has not been modified or repaired without the approval of
Arlec and has not been used for commercial purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own expense, return the product,
and provide proof of original purchase and your name, address and telephone number,
to Arlec at the address below or the retailer from whom you originally purchased the
product within 12 months from the date of purchase.
Arlec will (or authorise the retailer to) assess any claim you may make on the Warranty in
the above manner and if, in Arlec’s reasonable opinion, the Warranty applies, Arlec will
at its own option and expense (or authorise the retailer to) replace the product with the
same or similar product or repair the product and return it to you or refund the price you
paid for the product. Arlec will bear its own expenses of doing those things, and you must
bear any other expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you may have under a law in
relation to the product to which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty.
Arlec’s telephone number, address and email address are:
Customer Service: (03) 9982 5111
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: [email protected]
CPIN002309
Plug-In Wireless Door Chime
with Power Socket
DC687
Installation & Operating
Instructions
CPIN002309
DC687_CPIN002309.indd 1-3
30/03/12 4:00 PM