Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty.
Arlec’s telephone number, address and email address are:
Customer serviCe: (03) 9982 5111
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: [email protected]
Warranty
Arlec guarantees this product in accordance with the Australian Consumer Law.
Arlec also warrants to the original first purchaser of this product (“you”) from a retailer that this product will be
free of defects in materials and workmanship for a period of 12 months from the date of purchase; provided the
product is not used other than for the purpose, or in a manner not within the scope of the recommendations and
limitations, specified by Arlec, is new and not damaged at the time of purchase, has not been subjected to abuse,
misuse, neglect or damage, has not been modified or repaired without the approval of Arlec and has not been used
for commercial purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own expense, return the product, and provide proof of
original purchase and your name, address and telephone number, to Arlec at the address below or the retailer from
whom you originally purchased the product within 12 months from the date of purchase.
Arlec will (or authorise the retailer to) assess any claim you may make on the Warranty in the above manner and
if, in Arlec’s reasonable opinion, the Warranty applies, Arlec will at its own option and expense (or authorise the
retailer to) replace the product with the same or similar product or repair the product and return it to you or refund
the price you paid for the product. Arlec will bear its own expenses of doing those things, and you must bear any
other expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you may have under a law in relation to the product to
which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
CPIN002568
cpin002568
4
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE
THE LED METER
CHARGING A 12 VOLT BATTERY
BC581
(SERIES 6)
COMPACT 2500
BATTERY CHARGER 12 VOLT
This Arlec battery charger is designed to charge 12 Volt lead-acid batteries. It is an easy charger to
use and will charge your flat battery to get your car, boat or motorcycle going again. The charger is
protected internally by a thermal overload switch which cuts off the current in the event of a short
circuit, an overload or reversed connection to the battery and is double insulated for added safety.
Before using this charger it is essential that you read important safety information on page 3.
The Meter comprises of three Light Emitting Diodes (LEDs) which illuminate to register connected,
charging and charged.
As the battery is charging the red and yellow LEDs will illuminate to indicate that the battery is being
charged. When all three LEDs are illuminated your battery is charged. The green LED should be used
as a guide only to the charge status of your battery
The output leads are fitted with coloured clips for easy identification of polarity.
Red for positive (+) and black for negative (-).
1. Before connecting or disconnecting the charger to a battery, ensure that your power point is
switched ‘OFF’.
2. Ideally, disconnect and remove the battery from the vehicle, however if this is not possible it
is advisable to disconnect the battery leads so as to protect the electronic systems within the
vehicle. (Refer also to “Important Notes Section).
OPERATING INSTRUCTIONS
