Arjo Huntleigh Sonicaid Team3 USA Скачать руководство пользователя

Страница: 66 / 84

Instructions For Use

Save Local Settings = Fix all

current settings as defaults.
Apply Defaults = Overwrite all

current settings with the stored

defaults.
Imports and Exports allow transfer

to and from Team3 via USB Flash

Drive.*

Note: Do NOT transfer settings files from one monitor to another if the software versions are not the same.

Note: Import/Export buttons are only displayed when a USB Flash Drive is installed.

*A software tool is available from your supplier to support the Easinote function. See section 13.6.

Allows NiBP protocol details to be

customised.

13.6 Customising Easinotes

WARNING

The Secure Settings menus should be accessed by authorised personnel only.

The Easinote sub-system is very flexible allowing up to 12 groups of 12 notes to be configured on Team3.

Refer to Section 13.5 for details on how to change the Language and to access the Settings Management

feature.

Exporting Easinotes

1. With Team3 switched on, plug a USB flash drive into one of the Team3 USB sockets.
2. Set up Team3 to operate in the language of your choice. This will ensure that the Easinote file to be

exported is saved with the other files for that language. It is important to remember that each language has

its own Easinotes file so Easinotes will change with Language selection.

Содержание Huntleigh Sonicaid Team3 USA





















































































Результаты поиска

Содержание Huntleigh Sonicaid Team3 USA

Отзывы:

Похожие инструкции для Huntleigh Sonicaid Team3 USA

Бренды по названию

Популярные бренды

Arjo Huntleigh Sonicaid Team3 USA, Инструкция по эксплуатации

Результаты поиска

Содержание Huntleigh Sonicaid Team3 USA

Отзывы:

Похожие инструкции для Huntleigh Sonicaid Team3 USA

Бренды по названию

Популярные бренды