Arjo Huntleigh Sonicaid Team3 USA Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 84

background image

57

Instructions For Use

EN

13. Maintenance

Warning

It is very important that all instructions in the Maintenance section are followed carefully.

13.1 User maintenance

The checks below can be performed by any user of the equipment.

Mechanical inspection

Every three months:
1. Inspect the AC supply cable, transducers, and all other assemblies and connectors for loose or broken

  parts, or any other damage.
2.  Pay particular attention to the AC supply socket.
3.  Look carefully for cracks which may allow the ingress of liquids or gels.
4.  Replace any broken or damaged transducers or cables.
5.  If there is damage to the main Team3 unit, contact your local Huntleigh Healthcare Ltd representative.

Cleaning the print head on the printer

1.  Pull the paper tray out as far as it will go.
2.  Remove the paper pack.
3.  Using a lint-free cloth and pure alcohol, wipe along the full width of the print head, which is beneath the

plastic edge of the paper compartment.
4. Replace the paper tray and paper pack.

Check NIBP cuffs and hose

Once a month:
1. Check the NIBP hose. Straighten out any kinks and distortions.

2. Check the cuff(s) for wear and damage.

13.2 Technical maintenance

Refer to your Service department for details of technical maintenance and support.

13.3 Corrective maintenance

All corrective maintenance must be performed by qualified engineers approved by Huntleigh Healthcare Ltd.

The Sonicaid Team3 Service Manual (order part number 777490) is designed as an aid to engineers in

maintenance and service of repairable parts.

13.4 Servicing

Servicing should be performed only by Huntleigh Healthcare Ltd or their appointed service agent. If you have

difficulty obtaining service for Team3, contact Huntleigh Healthcare Ltd.

WARNING

Servicing cannot be performed while the unit is in use.

«
...
55
56
57
58
59
...
»

Содержание Huntleigh Sonicaid Team3 USA





















































































Отзывы:

Нет отзывов

Похожие инструкции для Huntleigh Sonicaid Team3 USA

Бренд: Kane Страницы: 12

Бренд: Valor Страницы: 13

Бренд: Campbell Страницы: 31

Бренд: ICT Страницы: 48

Бренд: OfiTE Страницы: 67

Бренд: Bacharach Страницы: 28

Бренд: TC Electronic Страницы: 20

Бренд: Underground Magnetics Страницы: 48

Бренд: Keithley Страницы: 343

Бренд: Keithley Страницы: 334

Бренд: La Crosse Technology Страницы: 2

Бренд: Major tech Страницы: 16

Бренд: Zoetis Страницы: 2

Бренд: Polimaster Страницы: 6

Бренд: STONEX Страницы: 99

Бренд: Hanna Instruments Страницы: 28

Бренд: Omega Страницы: 4

Бренд: HANLA Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды