38
Instructions For Use
EN
Cleaning the Leads
To disinfect the leads, follow these steps:
1) Wipe them with a soft cloth dampened in the recommended cleaning solution.
2) Wipe them clean with a soft cloth dampened in water.
3) Air-dry them or wipe the remaining moisture with a soft dry cloth.
3.3 Sterilising
Do not sterilise the base station or the accessories, unless this is necessary according
to your hospital regulation.
3.4
Before Use
NOTE. Check if the base station, cables and accessories function well. If
any problem is detected, please contact the manufacturer for service before
reusing them.
Visual
Inspect the base station and cables etc. for any damage.
Power On
Power on the system. Does it boot up successfully without errors?
Functionality
Test
When the monitor is connected to FTS-3, after power up, check
whether the battery status indicator and base station working
channel display on the screen of transducer as stated in section
2.1.2
Performance
Please check the US transducer and TOCO transducer according
to section 2.3.8.