Aristel IPX-100 Скачать руководство пользователя страница 85

Страница: 85 / 114

IPX-100 system installation & configuration

Page-85

TELECOMMUNICATIONS

IVR

Forward to IVR.

Ring Group

Forward to ring group.

Extension

Forward to extension.

Queue

Forward on queue.

Time Condition

Set processing according to time conditions.

Conference Room Forward to tele-conference room.

Forward To

Forward to trunk line (set trunk line code + outgoimg phone number).

Destination If Time Does Not Match

At this page sets the time that does not match the time is used to set how the system

should handle when the system judgment time does not match the set time condition.

The main items selected in the destination field are Hangup, Voicemail, Extension, and

Forward To. According to the user settings, the selectable items are IVR, Ring Group, Queue,

Time Condition, and Conference Room. described as follows:

Hangup

Hangup the call.

Voicemail

Forward to voicemail, “Dialed Ext.” to enabled voicemail forward

function code for the extension.

IVR

Forward to IVR.

Ring Group

Forward to ring group.

Extension

Forward to extension.

Queue

Forward on queue.

Time Condition

Set processing according to time conditions.

Conference Room

Forward to tele-conference room.

Forward To

Forward to trunk line (trunk line code + outgoing phone number).

5-8-2

Delete the Time Condition

Select the checkbox in front of the time condition in the list and click the “Delete” button to

delete this time condition. If you select the checkbox in the header field, all time conditions

will be deleted.

Содержание IPX-100



















































































































Результаты поиска

Содержание IPX-100

Отзывы:

Похожие инструкции для IPX-100

Бренды по названию

Популярные бренды

Aristel IPX-100, Руководство по установке

Результаты поиска

Содержание IPX-100

Отзывы:

Похожие инструкции для IPX-100

Бренды по названию

Популярные бренды