Arista O-105 Скачать руководство пользователя страница 9

Страница: 9 / 18

Table 3: Power LED States Description

Orange

Green

Running at reduced capability

Running at full capability

Solid

Did not receive an IP address

Received IP address, but not connected to the server

Blinking

Reduced capability indicates that the AP is getting lower than the required maximum power from the PoE switch,
i.e., 802.3af instead of 802.3at.

LAN1 LED: ON when the corresponding interface is up.

LAN2 LED: ON when the corresponding interface is up and either wired guest or link aggregation is configured.

Radio LEDs: ON when the corresponding radio is operational.

Bottom Panel of O-105

The bottom panel of the O-105 has LAN/PoE connectors that enable you to connect the device to a wired LAN
through a switch or a hub. The ports provide power for the device by using the 802.3at standard.

Figure 3: O-105 Bottom Panel

Table 4: Labels: Ports

Description

Label

LAN2

LAN1 (PoE)

Table 5: O-105 Port Details

Speed/Protocol

Connector Type

Description

Port/Button

Quick Start Guide: Access Point

Содержание O-105



















Результаты поиска

Содержание O-105

Отзывы:

Похожие инструкции для O-105

Бренды по названию

Популярные бренды

Arista O-105, Быстрый старт

Результаты поиска

Содержание O-105

Отзывы:

Похожие инструкции для O-105

Бренды по названию

Популярные бренды