Arista 7300 Series, Быстрый старт

Страница: 50 / 66

B.2.2 Inserting Fan-only Modules
The fabric module insertion process is the inverse of the removal procedure. These instructions
describe the method of inserting the fabric module into a chassis.
1. Grasping the module by its frame, place the module chassis railing that corresponds to the slot
where it is to be placed. The lock-levers should be in the closed position.
2. Slide the module into the chassis until it is within three to four inches of being fully inserted.
3. Extend the lock-levers towards the top and bottom of the chassis.
4. Continue inserting the module into the chassis.
5. Return the lock-levers to the closed position, securing the module to the chassis.
6. Secure each lock-lever handle to the module by inserting the release screw into the module body
and rotating clockwise.
46