Product Image
Level of Difficulty
Easy
Scan
for helpful
install tips
Front
Rear
INSTALLATION MANUAL
S224046-2
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product.
Do not use dish detergent, abrasive cleaners, abrasive pads,
wire brushes or other similar products that may damage the finish.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Parts List
1
Driver / left side bar
1
Passenger / right side bar
4
Mounting bracket, universal
2
Mounting bracket,
passenger / right, front, upper
2
Mounting bracket,
passenger / right, front, lower
10
Clip nut, M8
10
Hex bolt, M8 x 25mm
10
Flat washer, M8
10
Lock washer, M8
14
Hex bolt, M10 x 30mm
14
Flat washer, M10
14
Lock washer, M10
Tools Required
Ratchet
Socket, 16mm
Wrench, 16mm
Socket, 13mm
Level
Torque Specifications
M
E
T
RIC
M6 bolt
3 ft.-lbs.
M8 bolt
7 ft.-lbs.
M10 bolt
16 ft.-lbs.
M12 bolt
28 ft.-lbs.
SA
E
1/4" bolt
3 ft.-lbs.
5/16" bolt
7 ft.-lbs.
3/8" bolt
16 ft.-lbs.
7/16" bolt
20 ft.-lbs.
1/2" bolt
28 ft.-lbs.
Use above torque setting
unless otherwise noted
PAGE 1 • S224046-2-INS-R
D
•
877.287.8634
• NEED ASSISTANCE?
•
ARIESAUTOMOTIVE.COM
