Ariens Professional 21 938024-SSR Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 26

Ariens Professional 21 938024-SSR Скачать руководство пользователя страница 20

EN - 18

SHORT TERM STORAGE

1. Engage auger momentarily to remove

loose or melting snow to prevent auger
shaft from freezing.

2. Tighten all hardware to correct

specifications.

3. Inspect unit for visible signs of wear or

damage. Repair as needed.

4. Apply a light layer of oil or anti-rust

compound on bare metal areas.

5. Prepare fuel system for storage.

NOTICE:

Ariens recommends using a quality

fuel stabilizer in all fuel. Gasoline left in the
fuel system without a stabilizer, even for short
periods of time, deteriorates and leaves
gummy deposits in the system that may
damage the carburetor and fuel hoses, filter
and tank. For the best effectiveness, add
stabilizer to all fuel containers whenever
purchasing fuel. Add the stabilizer to the
container before adding fuel.

a. Add Ariens fuel stabilizer (see

on page 13) or equivalent

according to manufacturer's
instructions to the fuel tank and any
fuel containers with remaining fuel.

b. Run engine outdoors for at least

5 minutes to allow stabilizer to reach
the carburetor.

6. Turn fuel valve to the off position and

allow engine to stop on its own.

7. Push engine switch into the stop position.
8. Store unit in a cool, dry, protected area.

Do not store unit outdoors.

LONG TERM STORAGE

1. Perform all short-term storage items.
2. Wash salt and other corrosive ice-melting

agent residue from unit with mild soap
and low-pressure water.

IMPORTANT:

Never spray unit with high-

pressure water.
3. Touch up all scratched painted surfaces.
4. Store unit in a cool, dry, protected area.

Do not store unit outdoors.

START-OF-SEASON FUEL

PREPARATION

Before opening the fuel valve for the first time
after long-term storage, add fresh, stabilizer-
treated fuel to the fuel tank and any fuel
containers with remaining fuel.

See your Ariens dealer for a complete list of
compatible accessories and attachments for
your unit.

STORAGE

WARNING:

AVOID INJURY. Read

and understand the

section

before proceeding.

ACCESSORIES

Description

Part No.

Sno-Thro Cover Kit

73801100

Protective Floor Mat

70707600

Maintenance Kit*

73801000

*Includes 16 oz. 5W-30 engine oil, spark
plug, fuel stabilizer and non-stick spray
(Snow-Jet).

«
...
18
19
20
21
22
...
»

Содержание Professional 21 938024-SSR



























Отзывы:

Нет отзывов