background image

11

Fig. 11

Fig. 12

MAINTENANCE

Disconnect spark plug wire before performing any maintenance (except car bu re tor adjustment) to 
prevent accidental start ing of engine.

Prevent fires!  Keep the engine free of grass, leaves, spilled oil, or fuel.  Re move fuel from tank 
before tipping unit for maintenance.  Clean muffler area of all grass, dirt, and debris. 

Do not touch hot muffler or cylinder fins as contact may cause burns.

ENGINE

LUBRICATION

Use only high quality detergent oil rated with API service 
classification SG-SL.  Select the oil’s SAE vis cos i ty grade 
according to your expected temperature.

NOTE:

  Although multi-viscosity oils (5W-30, 10W-30, etc.) 

improve starting in cold weather, these multi viscosity oils 
will result in increased oil consumption when used above 
32°F (0°C).  Check your engine oil level more frequently 
to avoid possible engine damage from running low on oil.

Change the oil after every 50 hours of operation or at least 
once a year if the tiller is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine 
and after each five (5) hours of continuous use.  Add SAE 
30 motor oil or equivalent.  Tighten oil filler plug securely 
each time you check the oil level.

TO CHANGE ENGINE OIL (See Figs. 11 and 12)

Determine temperature range expected before oil change.  
All oil must  meet API service classification SG-SL.
• 

Ensure tiller is on level surface.

• 

Oil will drain more freely when warm.

• 

Catch oil in a suitable container.

• 

Remove drain plug.

• 

Tip tiller forward to drain oil.

4%-0%2!452%ª2!.'%ª!.4)#)0!4%$ª"%&/2%ª.%84ª/),ª#(!.'%

ªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªª3!%ª6)3#/3)49ª'2!$%3

• 

After oil has drained completely, replace oil drain plug 
and tighten securely.

• 

Remove oil filler plug.  Be careful not to allow dirt to 
enter the engine.

• 

Refill engine with oil.  See “CHECK ENGINE OIL LEVEL” 
in the Operation section of this manual. 

Fig. 13

CLEANING AIR CLEANER 

DUAL ELEMENT 

TYPE (See Fig.13)

A dirty air cleaner element will cause starting difficulty, 
power loss, engine malfunctions, and shorten engine life 
extremely. Always keep the air cleaner element clean.

Urethane Foam cleaning

•   Wash and clean the urethane foam with detergent.
•   After cleaning, dry it. 
•   Clean the urethane foam element every 50 hours.

Second element

•   Clean by tapping gently to remove dirt and blow off 

dust.

•   Never use oil. 
•  

Clean the paper element every 50 hours of operation, 
and replace element set every 200 hours.

•   Clean and replace air cleaner elements more often 

when operating in dusty environments.

OIL DRAIN PLUG

OIL FILLER PLUG

OIL LEVEL

FOAM ELEMENT

ELEMENT

WING NUT

COVER

Содержание 902032

































































Отзывы: