PiCUS TMS 3 manual
12
www.argus-electronic.de
4.4.4 Querying and deleting the link key list
(obsolete, only relevant for TMS 3 Hardware Version 3.4)
The link key list saves all Bluetooth addresses from PCs that were already paired with the PiCUS TMS
3. This allows a fast and automated reconnection with these PCs.
A maximum number of 8 Bluetooth addresses can be saved. Afterwards, if a
new computer is connected with the PiCUS TMS 3 the oldest entry in the list
gets overwritten.
When connection problems happen, it can be necessary to delete the link key
list.
1. Navigate to the page
SENSOR INFORMATION
(see
4.4.3 Querying
sensor information
)
2. Press the button
SHOW LINKKEY LIST
view changes to the link
key list
3. For deleting the list press
DELETE LIST
.
ATTENTION! After deleting the link key list, all PCs have to be paired anew
when connecting with the PiCUS TMS 3.
4.4.5 Errors
If no connection can be established between the PiCUS TMS 3 and the mobile phone:
-
Make sure that the sensor is switched on
-
Shorten the distance between sensor and mobile phone (< 5 m)
-
Establish a direct line of sight between sensor and mobile phone
Search for active sensors again with
REFRESH
