manualshive.com logo in svg

Argus 165, Руководство пользователя

Поделиться
Скачать
Argus 165 Скачать руководство пользователя страница 44

7 Operation on xDSL accesses

44

ARGUS 165

INP/SNRM

Determines whether preference is to be given to INP (inpulse noise 
protection) or SNRM (signal-to-noise- ratio margin) when an ADSL 
connection is established.

Default: 

Favour DS SNRM

Retrans-
mission 
(G.INP)

When retransmission (G.INP, G.998.4) is used, the downstream of ADSL 
links is protected against pulse noise on layer 1. Delays and packet losses 
are minimised; however, this increases the interleave delay for 
downstream.

Default: 

Down- & Upstream

When Retransmission (G.INP) is active, ARGUS shows in the status line a 
„R“ for Retransmission.

When Retransmission (G.INP) is unlocked but not active, ARGUS shows in 
the status line a „R“ for Retransmission.

MAC address (line) 

(not available using the access wizard)

Display and selection of the line MAC addresses. 

The first two MAC addresses cannot be manually edited.

1. When the standard MAC address is selected, ARGUS uses its own 

MAC address. 

    Default: 

Standard MAC address

2. When you select the dynamic MAC address, a different MAC address 

is used each time the device synchronises.

3. You can enter a third MAC address: 

Mark the line and then press 

<Edit>

. 

<Edit>

Entry of new MAC address.

The address is entered in hexadecimal form using the 
number keys and key combinations: *1=A, *2=B,*3=C, 

*4=D, *5=E, *6=F and confirmed with 

. 

No group MAC addresses may be used.

Default: 

00:00:00:00:00:00

Accepting the address.

The new address is temporarily saved, and is no longer 
available after powering down.

Press one after 
another

 and 

Display of ARGUS MAC addresses:

Line, LAN, SFP, ETH, see also page 324 and following.

Содержание 165












































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды