manualshive.com logo in svg

Argus 152, Руководство пользователя

Поделиться
Скачать
Argus 152 Скачать руководство пользователя страница 365

27 Using the battery pack

ARGUS 152

 

365

27 Using the battery pack

Changing the battery pack

Power down ARGUS and disconnect the power adapter. Then release the knurled screw 
securing the battery pack.

Handling the battery pack 

ARGUS may only be operated using the battery pack supplied with the device; 
connecting other power supply units to the contacts of the device will damage 
ARGUS.

Automatic charging of the battery pack when ARGUS is powered down

ARGUS automatically charges the battery pack as soon as the device is powered down 
when the power adapter is connected and the battery voltage is too low. During charging, 
ARGUS displays "Charging battery" in the display. Hold down the power button to switch 
ARGUS off before the batteries are charged. ARGUS remains powered up after the battery 
pack is fully charged.

-

Only charge the supplied battery pack in ARGUS.

-

Do not use the ARGUS battery pack in other devices.

-

Active charging of the battery pack and automatic charging (on by default) may only 
be carried out in a temperature range of 0 °C to +40 °C. 

-

Charge the battery pack completely at least once a month (even if the device has not 
been used for a longer period!).

-

The lithium ion battery pack should be stored with a charge of  40 to 60 %. When 
storing the device for longer periods, you should refresh this charge level every six 
months. To prevent full discharge, remove the battery pack from the device for long-
term storage.

To maximise battery life, do not store the battery long-term at temperatures above 
+50 °C.

-

See the chapter Safety information (page 11) for detailed information on using and 
transporting the lithium ion battery pack safely.

Содержание 152

























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды