Cursor (3):
When the Stop function (see
page 319) is activated, you can move
the cursor faster.
22 Copper tests
ARGUS 152
315
The Zoom softkeys can be used to zoom
in on or out of (the graph) by anywhere
from 6.25 % to 100 %. In the process, the
resolution will be doubled or halved.
By using the Cursor at the same time, it is
possible to precisely locate the reflection
on the line measured.
The Zoom softkeys can be used to zoom
in on or out of (the graph) by anywhere
from 1.56 % to 100 %. In the process, the
resolution will be doubled or halved.By
using the Cursor at the same time, it is
possible to precisely locate the reflection
on the line measured.
When the Cursor function is started, a
green cursor line appears in the middle of
the graph.
The values of the graph for the position
under the cursor are displayed below the
graph:
The Zoom function and the Cursor function can also be combined. For example, you can
determine a certain value using the cursor more easily when you have previously zoomed
in on a specific area. However, the starting position of the cursor can vary.
Switch between softkey sets
<Cursor>
You can toggle the cursor on
and off as needed using the
Cursor softkey after activating it
in the menu.
x:
+151.4 m
Use the left and right cursor
keys to move the cursor to any
position on the graph to
measure it. Briefly pressing the
cursor key causes the cursor to
jump to a new position in the
graph. When the cursor key is
held down, the steps the cursor
covers in the graph become
progressively larger.
