Argus 145 Plus Скачать руководство пользователя страница 7

Страница: 7 / 361

1 Introduction

ARGUS 145

PLUS

1 Introduction

The ARGUS 145

PLUS

tests VDSL2, ADSL, SHDSL, Ethernet and ISDN BRI / U-interface

and POTS. This all-rounder with a color display offers support for VDSL2 (all profiles),

ADSL (Annex A and B) and SHDSL (2, 4, 6, and 8-wire with support for SHDSL.bis

(Enhanced) and EFM), Ethernet, ISDN (BRI and U-Interface) and even POTS; all

integrated into a single handheld device. Separate chipsets for ADSL, VDSL2 and SHDSL

ensure optimum performance on all of these interfaces.

In addition to functioning as an analog handset and ISDN tester, it also offers support for

testing all of the various xDSL interfaces and, via Ethernet, VoIP. Besides simulating a

terminal, it also offers extensive statistics functions and evaluates voice quality in

accordance with a variety of techniques, such as using MOS tests (R-factor).

In addition, an optional package is available for determining the Media Delivery Index (MDI)

and assessing IPTV and Video on Demand data streams. The ARGUS 145

PLUS

is also

well equipped for checking Internet connections as it has IP PING and Trace Route

functions as well as upload and download tests.

Rounding out the package, the ARGUS can operate in xDSL-Bridge and Router mode and

can also perform an IPTV or xDSL-Online-Trace when it is used together with the

WINanalyse program on a Windows PC. Resistance and capacitance measurements are

available to check the physical characteristics of the subscriber’s line. In view of the above

set of features, it is obvious that the ARGUS 145

PLUS

offers a wide range of measurement

functions for use on the current interfaces. Nonetheless, it should not be overlooked that

this extensive set of features has been packed into an small, handy device; one that is not

only very compact and convenient to use on location – wherever that location might be –

but one that is also ready for use in no time.

Ease of Use



The ARGUS 145

PLUS

is also extremely easy to use. It has a large (320 x 240 pixel) color

display, is operated using softkeys includes a USB client interface. The tester has two

Ethernet interfaces and uses a high-powered, long-life lithium-ion (rechargeable) battery

pack.



Software updates can be downloaded to a PC free of charge and then loaded into the

ARGUS at any time. They are available at www.argus.info/en/service.

Содержание 145 Plus










































































































































































































































































































































































Результаты поиска

Содержание 145 Plus

Отзывы:

Бренды по названию

Популярные бренды

Argus 145 Plus, Руководство пользователя

Результаты поиска

Содержание 145 Plus

Отзывы:

Бренды по названию

Популярные бренды