Argus 145 Plus Скачать руководство пользователя страница 340

Страница: 340 / 361

20 Using the Battery Pack

340

ARGUS 145

PLUS

20 Using the Battery Pack

Changing the battery pack

Switch the ARGUS off and disconnect the plug-in power supply. Afterwards, loosen the

thumbscrew to release the battery pack.

Battery pack handling

The ARGUS may only be operated with the included battery pack. Connecting any

other voltage supply to the battery pack contacts will damage the ARGUS.



Automatic recharging of the battery pack when the ARGUS is switched off

The ARGUS automatically recharges the battery pack (often shortened to "accu" for

accumulator), if the ARGUS is connected to the plug-in power supply and is switched off

and the battery pack voltage is too low. While charging, the ARGUS displays the message

“Charge accu”. If you press and hold the power switch, the ARGUS will switch off before

the accumulators are recharged. The ARGUS remains on after fully recharging the battery

pack.

The supplied battery pack may only be charged in the ARGUS.

Do not use the supplied battery pack in other devices.

Battery charging, both active or in background mode (switched off by default), must

be carried out with temperatures ranging from 0 °C (+32°F) to +40 °C (+104 °F).

Recharge the battery pack fully at least once a month (even if the ARGUS is not used

for a longer period of time).

If the lithium-ion battery pack is stored, it should first be charged to between 40 and

60 % of its capacity. If the lithium-ion battery pack is stored for a longer period of time,

it should be recharged to this level every six months.



The long-term storage temperature of the battery pack must not 50°C



(+122 °F).

Please read the extensive notes on safety and the transport of the lithium-ion battery

pack found in the section "Safety Instructions“.

Содержание 145 Plus










































































































































































































































































































































































Результаты поиска

Содержание 145 Plus

Отзывы:

Бренды по названию

Популярные бренды

Argus 145 Plus, Руководство пользователя

Результаты поиска

Содержание 145 Plus

Отзывы:

Бренды по названию

Популярные бренды