manualshive.com logo in svg

Argus 145 Plus, Руководство пользователя, Страница: 261 / 361

Поделиться
Скачать
Argus 145 Plus Скачать руководство пользователя страница 261

14 Operation on an ISDN Access

ARGUS 145

 PLUS

261

14.5.2 Supplementary Services on DSS1

The ARGUS - Main menu







The speed-dialing memory opens (see 
page 339).

Using the cursor keys,

 

select the service 

which should be used for the 
supplementary services test.

Enter the B-channel on the keypad. The 
ARGUS suggests the B-channel used last. 
If you enter an *, the ARGUS will choose 
any B-channel that is free.

Select the supplementary service, which 
the ARGUS should determine whether it is 
supported by this access.

Start test.

Display the test results:

<

>

<

>

Scroll through to your own call 
number (the number of the access 
under test) or enter it using the 
keypad.

The ARGUS will test the availability 
of the supplementary service (in 
part by placing a call to itself). 

+

-

=

=

suppl. service supported

suppl. service not supported

to scroll through the results

Close the results display and 

open the next higher menu

Single Tests

Supplementary Services

Enter own number

Select service

Select a B-channel

Select test case

Содержание 145 Plus










































































































































































































































































































































































Отзывы:

Нет отзывов