manualshive.com logo in svg

Argus 145 Plus, Руководство пользователя, Страница: 192 / 361

Поделиться
Скачать
Argus 145 Plus Скачать руководство пользователя страница 192

11 IP Tests

192

ARGUS 145

 PLUS

11.4 FTP Download 

In the FTP download test, the ARGUS will attempt to download a file. The ARGUS will 

display the current net download rate (the user data of the IP packets) and once the test is 

over the net average speed (in the case of multiple download attempts).

The following parameters (which are stored in the profile) are required for the FTP 

download:

Protocol-independent parameters:





















Select a profile for editing. The 
selected profile will be marked blue 
in the display. The default profile 
will be marked in the display with a 

. The ARGUS will use the 

parameters in the default (preset) 
profile to setup the Ethernet or 
xDSL connection and for the FTP 
download.

The ARGUS uses the marked 
profile as the default profile and 
returns to the Settings menu.

Profile

Test parameters

FTP download

Settings

Continuation on 

next page

Содержание 145 Plus










































































































































































































































































































































































Отзывы:

Нет отзывов