Argus 145 Plus Скачать руководство пользователя страница 152

Страница: 152 / 361

9 Operation on an Ethernet Access

152

ARGUS 145

PLUS

9.2 Ethernet Settings

The ARGUS stores all of the settings required to run a test (e.g. IP ping etc.) in profiles. Up

to 10 user-defined profiles can be created. A specific profile can be selected before a

connection is setup or a test performed, otherwise the ARGUS will use the default (preset)

profile. Only those settings which are relevant will be used for the respective test situation.



The default (factory) settings can be restored at any time (see page 338). The procedure

for changing a setting will be illustrated with a single example:













Select a profile. The selected
profile will be marked blue in the
display. The default profile will be
marked in the display with a



The ARGUS will use the default
profile to setup the connection.



The ARGUS uses the marked
profile as the default profile and
returns to the Settings menu.



Select the Access Parameters



Select Phys. parameters



Select Ethernet

Settings

Profile

Access parameters

Phys. parameters

Ethernet

Continuation on

Содержание 145 Plus










































































































































































































































































































































































Результаты поиска

Содержание 145 Plus

Отзывы:

Argus 145 Plus, Руководство пользователя, Страница: 152 / 361

Результаты поиска

Содержание 145 Plus

Отзывы: