Argus 145 Plus Скачать руководство пользователя страница 147

Страница: 147 / 361

9 Operation on an Ethernet Access

ARGUS 145

PLUS

147

9.1 Setting the Ethernet Interface

To use the ARGUS as a replacement for a PC, connect one end of the provided patch

cable to its "LAN“ jack and the other end to a modem, hub, switch or PC (see sketch on

page 144) and then switch the ARGUS on. The „displayed“ configuration will be dependent

on the previous test (in the examples, S-Bus and Ethernet accesses):



The Access Menu:

Select Ethernet as the

type of access. The

selected type of access

will be marked blue in the

display.

The access type marked in blue,

Ethernet, will be used. The State

display will open.

Continuation on

Содержание 145 Plus










































































































































































































































































































































































Результаты поиска

Содержание 145 Plus

Отзывы:

Argus 145 Plus, Руководство пользователя, Страница: 147 / 361

Результаты поиска

Содержание 145 Plus

Отзывы: