P4 Series
User Manual
58
6
Specifications
This chapter provides specifications for the printer.
Specifications are subject
to change without notice.
6.1
Printer
Model
P4-250
P4-350
P4-650
Print method
Direct Thermal and Thermal Transfer
Resolution
203 dpi (8 dots/mm)
300 dpi (12 dots/mm)
600 dpi (24 dots/mm)
Media Alignment
Centered
Operation Mode
Standard: Continuous
mode
, Tear-off
mode
Optional: Cutter
mode
, Peeler
mode
Sensor
Media Sensor: Gap Sensor (Transmissive, Fixed, 6.27mm offset)
Sensor (Reflective, Movable)
Head Open Switch
Ribbon Sensor
Print Speed
2, 3, 4, 5, 6 inches/sec
(50.8, 76.2, 101.6, 127,
152.4 mm/sec)
2 &3ips for peel off
mode
2, 3, 4 inches/sec
(50.8, 76.2, 101.6 mm/sec)
2 &3ips for peel off mode
Max. 4ips
(101.6mm/s);
Max. 3ips (76.2mm/s)
for peel off mode
Max Printable Area
Max. 100”
Max. 50”
Max. 30
”
Print Ratio
Average print ratio within 15 % or less (whole print layout area)
Full width with 1mm pitch is required
Interface
USB host, USB device, RS-232, Ethernet
Optional Interface
BT, WiFi
Programming
Language
PPLA+PPLB+PPLZ
Accessories
Peeler,
Full Cutter, Partial Cutter, RTC,
External Media Stand
On-Board Memory
Standard Memory (Flash ROM): 16 MB
User Memory: 8 MB
Standard Memory (SDRAM): 32 MB
32MB DRAM,
16MB Flash ROM
Panel
2 LED, 1 Button
