22
Peel Off Mode
Note: For Peel-off mode you must first install the dispenser kit.
Please refer to Appendix I.
Follow Steps 1 to 8 listed in Standard Mode above.
9. Remove enough labels to expose approximately a 6"
length of backing paper.
Backing Paper
Peeler Sensor
23
10. Trim the front edge of the label backing paper with
scissors or a knife.
11. Lead the backing paper into the slot between the
dispenser bar and H cover, then ensure it is inserted
between the white plastic roller and platen roller.
12. Press the "FEED" button for the label backing paper to
H Cover
Media Guides
Dispenser Bar
