Argox AR-3201, Руководство пользователя

Страница: 53 / 165

45
3.5.3 String groups
￭ Insert G1/G2/G3/G4 character setting
You can insert up to two strings into a bar
code. Each string can contain up to 12
characters. First, you need to set a string
in a group, and then insert the group into
your bar code. There are four string
groups. You can decide which group you
want to use and where you want to insert
it. You can insert the same group two
times if you want.
Note if you want to insert G5-G10, use
Data Magic.
￭ Insert data group position
It determines the position that the string
group will be inserted into. Note that the
insertion position can't exceed the length
of a bar code, or the group will be inserted
at the end of the bar code. The value “00”
inserts the group at the beginning of a bar
code, and “64” inserts the group at the
end of a bar code.
Example
To insert a string group into a bar code:
Step 1. Set a string in a group.
1. Scan the
Program
and
Insert G1
characters setting
bar codes.
2. In the ASCII code table, find the value of
the character you want to insert. For
example, if you want to insert the string
"AB," you'll find A→41, B→42.