Argox AI-6821 Скачать руководство пользователя страница 84

Страница: 84 / 170

KeepF

Definition

Keep a
character or
characters from
the left of a
text string.

Attributes

￭

From: The start position of
the text to be kept.

￭

To: The end position of the
text to be kept.

KeepB

Definition

Keep a
character or
characters from
the right of a
text string.

Attributes

￭

From: The start position of
the text to be kept.

￭

To: The end position of the
text to be kept.

FindF

Definition

Remove a
certain length
of the string
from the left.

Attributes

￭

String: The specified group.

￭

Include: Remove everything
before the specified string.

￭

Exclude: Remove the
specified string and
everything before it.

FindB

Definition

Remove a
certain length
of the string
from the right.

Attributes

￭

String: The specified group.

￭

Include: Remove everything
before the specified string.

￭

Exclude: Remove the
specified string and
everything before it.

Содержание AI-6821











































































































































































Результаты поиска

Содержание AI-6821

Отзывы:

Argox AI-6821, Руководство пользователя, Страница: 84 / 170

Результаты поиска

Содержание AI-6821

Отзывы: