manualshive.com logo in svg

Argos Venetia, Руководство по сборке

Поделиться
Скачать
Argos Venetia Скачать руководство пользователя страница 1

Dimensions

Width - 80cm

Depth - 33cm 

Height - 86cm

Venetia - 

Shoe Storage

Assembly Instructions -

 Please keep for future reference

Issue 8 - 06/10/14

ALR2595

Issue 2 - 02/06/11 - Tools and Rule added to fittings page.

906/5716

Issue 3 - 17/05/12 - Argos code added.

Issue 4 - 20/12/12 - Title changed to Venetia.
Rebates taken off of the Left Side, Right Side, Top and Base - all gone up to issue B.
Shelves increased in size to 760 x 312mm - gone up to issue B.

MADE IN 

BRITAIN 

If you need help or have damaged or missing parts, call the 

Customer Helpline: 0870 112 1928

or 

email: [email protected]

 (quoting your original order number)

Important -

 Please read these instructions fully before starting assembly

Issue 5 - 29/07/13 -  Click have agreed with Argos to put their help line number on the Venetia range as a trial.

Issue 6 - 06/02/14 -  Replaced the F284 screw (6x5/8 flange head) with a F79 screw (6x1/2 flange head).

Issue 7 - 25/07/14 -  Deleted the blow up diagram at steps 4b and 5b and updated the text to current.

Issue 8 - 06/10/14 -  The unit is now available in Oak or White with a different handle on each.
The handle screw has been changed to a Flange Blunt End.

Oak

White

323/9603

White

Содержание Venetia

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды