manualshive.com logo in svg

Argos New Hallingford, Руководство по сборке

Поделиться
Скачать
Argos New Hallingford Скачать руководство пользователя страница 1

Assembly Instructions -

 Please keep for future reference

Issue 6 - 02/05/14

MADE IN 

BRITAIN 

If you need help or have damaged or missing parts, call the 

Customer Helpline: 0870 112 1928

or 

email: [email protected]

 (quoting your original order number)

Important -

 Please read these instructions fully before starting assembly

Issue 2 - 20/11/13 - Changed to Click helpline number

Dimensions

Width - 74cm

Depth - 40cm 

Height - 107.5cm

New Hallingford - 

5+2 Drawer Chest

ALR2979

245/8629

266/1708
258/7772
267/6401

244/8639

Issue 3 - 13/03/14 - Knock-in Pegs changed to Grey.
24 Wedgefixes added.
4 Plastinails added.
Drawer box depth increased

Issue 4 - 07/04/14 - There are now 4 holes for each runner in the Sides.
Both Sides gone up to issue B.

Issue 5 - 21/04/14 - Add ‘New’ to title.

Issue 6 - 02/05/14 - Removed note about locking nuts in steps 2, 3, 10 and 11.
Remove note about which panel holes to use for the runners in steps 17 and 18.
Changed orientation of the upper back rail in all of the relevant diagrams.

Содержание New Hallingford

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды